Paragweld - Welding Machine Manufacturer in India

Parag Traders was established in GIDC, Vatva, Ahmedabad in 1980 by Mr.Parag Mashruwala to cater to the requirement of welding electrodes, equipments™ and accessories.

Contact Us

TIG Welder Machine

  1. Home
  2. Products
  3. TIG Welder Machine

TIG Welder Machine Manufacturer

TIG welding (Tungsten Inert Gas / GTAW) is the premium welding process for precision applications where weld quality, appearance, and material integrity are critical. Using a non-consumable tungsten electrode and inert argon gas shielding, TIG welding produces clean, high-purity welds with minimal spatter — ideal for stainless steel, aluminium, titanium, and thin-gauge materials. Paragweld's TIG welder range is engineered for aerospace, pharmaceutical equipment, food-grade fabrication, and any application where cosmetic weld quality is as important as mechanical strength.

The Paragweld TIG range runs from the TIG 200A (10–200 A) through 250 A, 300 A and 400 A models up to the heavy-duty TIG 630 IJ. Every model runs on a 3-phase 415 V ±15% supply with a 60% duty cycle. For AC/DC welding of aluminium and pulse control on thin material, see our Pulse TIG/MMA AC/DC series.

Paragweld TIG 200A
Paragweld TIG 200A
Parag Weld TIG 250A
Parag Weld TIG 250A
Parag Weld TIG 300IGBT
Parag Weld TIG 300IGBT
Parag Weld TIG 400IGBT
Parag Weld TIG 400IGBT
Parag Weld TIG 400 IJ
Parag Weld TIG 400 IJ
Parag Weld TIG 630 IJ
Parag Weld TIG 630 IJ

frequently asked questions (FAQ)

Choose by the current your job needs. The TIG 200A (10-200 A) and TIG 250A (10-250 A) suit thin sheet and light fabrication. The TIG 300IGBT covers 10-300 A, while the TIG 400IGBT and TIG 400 IJ go up to 400 A for thicker sections. The TIG 630 IJ is the largest machine in the range. Tell our team your material and thickness and we will suggest a model.
Every TIG welder on this page runs on a three-phase 415 V ±15%, 50/60 Hz supply, so the machine keeps working through the moderate voltage swings found in many workshops. If you only have a single-phase supply, look at the TIG 200p in our Pulse TIG/MMA AC/DC series, which is listed for a 220 V single-phase input.
All models in this series are rated at a 60% duty cycle. In any 10-minute period the machine can weld for about six minutes at its rated output before it needs to rest and cool. When you weld below the rated current, the permitted welding time is longer, which covers most manual TIG work on thin and medium sections.
Pure argon is the standard shielding gas for TIG welding mild steel, stainless steel, copper and aluminium. It protects the tungsten electrode and the molten pool from the air. Argon-helium mixtures are sometimes used on thick aluminium or copper to put more heat into the joint. You will need an argon cylinder with a regulator and flowmeter connected to the machine.
Weights run from about 10 kg for the TIG 200A and 14.4 kg for the TIG 300IGBT to 21.5 kg for the TIG 400IGBT and 45 kg for the TIG 630 IJ, so the smaller models are easy to carry to a job. All housings are rated IP21, which guards against fingers and vertically dripping water but not rain, so keep the machine covered outdoors.

© 2026 All Rights Reserved by Parag Electrodes Agencies Pvt. Ltd. | Design & Developed by Clients Now Technologies

Terms & Conditions | Privacy Policy