Paragweld - Welding Machine Manufacturer in India

Parag Traders was established in GIDC, Vatva, Ahmedabad in 1980 by Mr.Parag Mashruwala to cater to the requirement of welding electrodes, equipments™ and accessories.

Contact Us

PW ARC 300G

  1. Home
  2. Products
  3. ARC Welder Series
  4. PW ARC 300G

ParagWeld ARC 300G

Parag Weld ARC 300G

Product Description :-

Manual Metal Arc Welding, also know as Shielded Metal Arc Welding, Flux Shielded Arc Welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode coted in flux to lay the weld. An electrode current, in the form of either AC or DC from a welding power supply, is used to from an electric arc between the electrode and the metal to be joined.

Because of versatility of process and simplicity of its equipments and operation, shielded metal arc welding is one of the worlds most popular welding processes. The process is used primarily to weld and steels (including stainless steel) but Aluminium, Nickel and Copper Alloys can also be welded with this method.

PARAMETERS ARC 300 G
Phase Three
Input Voltaw (Vin) AC 415V ± 15%
Input Freuncy (Hz) 50/60
Rated Input Power (kVA) 9.4
Rated Input Current (Amp) 20
No Load Voltage (V) 64
Output Current Range (A) 20-300
Rated Output Voltage (V) 76
Force Range (A) 0-100
Duty Cycle (%) 60
No Load Loss 50
Efficiency (%) 85
Power Factory 0.93
Insulation Grade F
Housing Protection Grade IP21
Wire & Electrode Dia 1.6 - 3.15
Weight (Kg) 17.5
Dimension (mm) 455 x 202 x 372

REQUEST A QUOTE

Talk to Expert
Chat with us

Our Products

About Us

Parag Traders was established in GIDC, Vatva, Ahmedabad in 1980 by Mr.Parag Mashruwala to cater to the requirement of welding electrodes, equipments™ and accessories to various industries specialising in Fabrication, Machine Shop, Forging and Castings in Ahmedabad.

As on today
Parag Traders is known as Paragweld

In the year 1990, we were appointed exclusive stockists of "MODI ARC ELECTRODES COMPANY," Modinagar (U.P.).

In the year 2009, "SHENZHEN RILAND INDUSTRY CO. LTD." appointed us as the stockiest of their "Hitronic" brand welding equipment™ for sales and services in Western India.

40+

Years in Industry

5000+

Happy Clients

50+

Total Products

150+

Man Power

Google Review

Google rating 4.9 out of 5 stars, based on 43 reviews

User Amit Awana

Owner of the company was very humble and polite, staff was good too.

User shubham diginix

Good Quality of welding machine and best services.

User Tushar Savaliya

Vey very humble and customer friendly company with full guidance in machineries.

frequently asked questions (FAQ)

The ARC 300G suits fabrication shops and maintenance teams that need more current than a 200 A or 250 A machine. It is a three-phase stick (MMA) welder with a 20-300 A output range and a 60% duty cycle, so it can handle longer runs with 3.15 mm electrodes on thicker mild steel sections.
Both give 20-300 A, take 1.6-3.15 mm electrodes and have a 60% duty cycle. The ARC 300G adds an adjustable force range of 0-100 A, a 0.93 power factor and a 9.4 kVA rating, and weighs 17.5 kg. The ARC 300GS is rated at 10.2 kVA, weighs only 9 kg and does not list a force range. Pick the 300G for arc force control and the 300GS for portability.
The ARC 300G is designed for a three-phase 415 V AC supply (plus or minus 15%) at 50/60 Hz, with a rated input power of 9.4 kVA. Use a properly rated breaker and isolator, a sound earth and input cable of the right size. A qualified electrician should check the supply before the machine is installed.
Use the lower part of the range for thin sheet and small electrodes, and the upper part for 3.15 mm electrodes on thicker plate. The 0-100 A force control helps prevent the electrode sticking when the arc gets short. Start with a moderate force setting and raise it for vertical or overhead welding where a stronger arc helps.
At its rated output the ARC 300G can weld for about 6 minutes in every 10 minutes and then needs roughly 4 minutes to cool. At lower current settings you can weld for longer before a rest is needed. Keep the machine in a well ventilated spot with its air vents clear so it cools efficiently.
The ARC 300G has Class F insulation and an IP21 housing, so keep it dry and use it indoors or under cover. Switch off and disconnect power before cleaning dust from inside. Check cables, the electrode holder and the earth clamp for damage, and always wear a welding helmet, gloves and protective clothing.

Places We Export To

Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha (Orissa), Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal

Agra, Ahmedabad, Aligarh, Allahabad, Amritsar, Amroha, Bengaluru, Bhopal, Chandigarh, Chennai, Coimbatore, Delhi, Dhanbad, Faridabad, Firozabad, Gurgaon, Guwahati, Gwalior, Hubli-Dharwad, Hyderabad, Indore, Jaipur, Jodhpur, Kalyan-Dombivali, Kanpur, Kolkata, Lucknow, Ludhiana, Madurai, Meerut, Moradabad, Mumbai, Nagpur, Nashik, Patiala, Patna, Pune, Raipur, Rajkot, Siliguri, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vasai-Virar, Vijayawada, Vishakhapatnam, Amreli, Anand, Bharuch, Bhavnagar, Bhuj, Botad, Champaner, Chanasma, Chikhli, Dabhoi, Dahod, Deesa, Dharampur, Dholera, Dudhrej, Dwarka, Gandhidham, Gandhinagar, Godhra, Gondal, Idar, Jamnagar, Jetpur, Junagadh, Kalol, Khambhat, Lakhpat, Mandvi, Mehsana, Morbi, Nadiad, Navsari, Palanpur, Palitana, Patan, Porbandar, Radhanpur, Saputara, Siddhpur, Songadh, Vadnagar, Valsad, Vapi, Veraval, Vyara, Wankaner

© 2026 All Rights Reserved by Parag Electrodes Agencies Pvt. Ltd. | Design & Developed by Clients Now Technologies

Terms & Conditions | Privacy Policy