Paragweld - Welding Machine Manufacturer in India

Parag Traders was established in GIDC, Vatva, Ahmedabad in 1980 by Mr.Parag Mashruwala to cater to the requirement of welding electrodes, equipments™ and accessories.

PW MIG 400 Pro

ParagWeld MIG 400 Pro Manufacturer

Parag Weld MIG 400 Pro

Product Description :-

Metal Inert Gas (MIG) welding or Metal Active Gas (MAG) welding, also known as Gas Metal Arc Welding (GMAW) is a semi-automatic or automatic arc welding process in which a continuous and consumable wire electrode and a shielding gas are fed through a welding gun. A constant voltage, DC power source is most commonly used with MIG/MAG, but constant current systems, as well as AC, can be used. There are four primary methods of metal transfer in MIG/MAG, called globular, short-circuting, spray, and pulsed-spray, each of which has distinct properties and corresponding advantages & limitations.

The Process became highly used in industry. Today, MIG/MAG is the most common industrial welding process, preferred for its versatility, speed and the relative ease of adapting the process to robotic automation. Unlike welding processes that do not employ a shielding gas, such as MMA, it is rarely used outdoors or in other areas of air volatility. A related process, flux cored arc welding, often does not utilize shielding gas, instead employing a hollow electrode wire that is filled with on the inside.

PARAMETERS MIG 400 Pro
Phase Three
Input Voltaw (Vin) AC 415V ± 15%
Input Freuncy (Hz) 50/60
Rated Input Power (kVA) 11.1
Rated Input Current (Amp) 26
No Load Voltage (V) 65
Output Current Range (A) 40-400
Rated Output Voltage (V) 31.5
Duty Cycle (%) 100
Efficiency (%) 85
Power Factory 0.93
Insulation Grade F
Housing Protection Grade IP21
Wire feeding Speed (M/Min) 3.00-15.00
Wire feeding Mechanism External
Wire Dia (mm) 0.8 - 1.2
Weight (Kg) 30
Dimension (mm) 530 x 290 x 450
Output Cable 35mm2

REQUEST A QUOTE

Our Products

About Us

Parag Traders was established in GIDC, Vatva, Ahmedabad in 1980 by Mr.Parag Mashruwala to cater to the requirement of welding electrodes, equipments™ and accessories to various industries specialising in Fabrication, Machine Shop, Forging and Castings in Ahmedabad.

As on today
Parag Traders is known as Paragweld

In the year 1990, we were appointed exclusive stockists of "MODI ARC ELECTRODES COMPANY," Modinagar (U.P.).

In the year 2009, "SHENZHEN RILAND INDUSTRY CO. LTD." appointed us as the stockiest of their "Hitronic" brand welding equipment™ for sales and services in Western India.

40+

Years in Industry

5000+

Happy Clients

50+

Total Products

150+

Man Power

Google Review

Google rating 4.9 out of 5 stars, based on 43 reviews

frequently asked questions (FAQ)

The MIG 400 Pro is a dedicated MIG/MAG welding machine with an output of 40 to 400 A. It is meant for general structural and fabrication work in mild steel, such as frames, beams, tanks, trolleys and machine bases, where 1.0 mm and 1.2 mm wire is run for long periods. It is a step up from the MIG 250F for workshops that handle thicker sections.
The MIG 400 Pro needs a three-phase AC 415 V supply (plus or minus 15%) at 50/60 Hz. Its rated input power is 11.1 kVA and its rated input current is 26 A, with a power factor of 0.93 and an efficiency of 85% as listed in the spec table. Have an electrician size the supply cable and breaker for this load and make sure the machine is properly earthed.
The spec table on this page lists the MIG 400 Pro duty cycle as 100%. Duty cycle is the portion of a 10-minute period the machine can weld at the stated current without resting. A high figure means long continuous runs with fewer breaks, which matters in production welding. Duty cycle always depends on the current used, so ask our team for the rating at your working current.
The MIG 400 Pro takes wire from 0.8 mm to 1.2 mm, with a wire feed speed range of 3 to 15 m/min. Paragweld supplies PW MAG-1 (AWS ER70S-6) solid wire and PW FC 71T-1 (AWS E71T-1) flux-cored wire in 1.2 mm, both on 15 kg spools, which suit this machine. The spec table lists the wire feeding mechanism as external, so a separate feeder unit is used.
Use a torch rated at or above the current you actually weld at. For a 400 A machine working in its upper range, the Paragweld 400 A MIG torch spares are the natural match. They include conical and tapered conical nozzles, a gas diffuser, insulator, tip holder, swan neck, a torch handle with switch and liners of 3.5 m or 5.5 m, with contact tips in 0.8 mm and 1.2 mm to suit this machine.
The MIG 400 Pro and MIG 400I share the same 40 to 400 A output, 0.8 to 1.2 mm wire range and 11.1 kVA input. The MIG 400I can also do MMA stick welding, while the 400 Pro is a dedicated MIG/MAG machine with a 3 to 15 m/min feed range. The MIG 500 Pro goes up to 500 A and takes 1.6 mm wire for heavier plate. Our team can help you choose on +91 90990 14043.

Places We Export To

Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha (Orissa), Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal

Agra, Ahmedabad, Aligarh, Allahabad, Amritsar, Amroha, Bengaluru, Bhopal, Chandigarh, Chennai, Coimbatore, Delhi, Dhanbad, Faridabad, Firozabad, Gurgaon, Guwahati, Gwalior, Hubli-Dharwad, Hyderabad, Indore, Jaipur, Jodhpur, Kalyan-Dombivali, Kanpur, Kolkata, Lucknow, Ludhiana, Madurai, Meerut, Moradabad, Mumbai, Nagpur, Nashik, Patiala, Patna, Pune, Raipur, Rajkot, Siliguri, Solapur, Srinagar, Surat, Thane, Vadodara, Varanasi, Vasai-Virar, Vijayawada, Vishakhapatnam, Amreli, Anand, Bharuch, Bhavnagar, Bhuj, Botad, Champaner, Chanasma, Chikhli, Dabhoi, Dahod, Deesa, Dharampur, Dholera, Dudhrej, Dwarka, Gandhidham, Gandhinagar, Godhra, Gondal, Idar, Jamnagar, Jetpur, Junagadh, Kalol, Khambhat, Lakhpat, Mandvi, Mehsana, Morbi, Nadiad, Navsari, Palanpur, Palitana, Patan, Porbandar, Radhanpur, Saputara, Siddhpur, Songadh, Vadnagar, Valsad, Vapi, Veraval, Vyara, Wankaner